Southbend HDO-36-LP 36" Liquid Propane Countertop Hotplate – 198,000BTU

Match your meticulous kitchen standard with Southbend HDO-36 Hotplate!Southbend HDO-36 Hotplate is a heavy-duty countertop with stainless-steel front and sides,aluminized steel rear and bottom panels and 4-inch stainless steel legs that are adjustable. It comes with a 12-inch cast flush top grates and a stainless steel, full-width, adjustable crumb tray. These features are fully removable, allowing a safer and easier cleaning and maintenance. Southbend HDO-36 Hotplate’s durable and clean finish proves that it is indeed the best match to the most productive kitchen there is. Southbend HDO-36 Hotplate is equipped with 6 open-top, non-clogging burners. It is powered by a total of 198,000 BTU natural gas, promoting a safer kitchen operation. It has an 11-inch (H) 36-inch (W) 33.75 (D) dimension, and weighs of 253 pounds. Being handy and safe at the same time, it comes with a 3/4-inch rear gas connection, pressure regulator and high/low burner controls. Southbend HDO-36 Hotplate is incomparable with other countertop of its kind as it built to be customized just way you want it to accomplish any cooking task.
Cleaning Instructions
Unplug, turn-off powerswitch and cold down the Southbend HDO-36 Hotplate before applying any cleaning operation. To remove normal dirt, grease and food residue from stainless steel, use ordinary soap and water applied with a use of sponge or cloth. Dry thoroughly with a clean cloth. To remove grease, food splatter or condensed vapors that have baked onto the equipment, rub a cleanser gently using a damp cloth or sponge in a direction of the polishing lines, without rubbing in a circular motion. Soiled and burnt may be removed only with scotch-brite or stainless-steel scouring pads. For more cleaning instructions, refer to the user manual provided by Southbend.
Additional Info
Southbend HDO-36 Hotplate is NSF and CSA certified.
General Info
Match your meticulous kitchen standard with Southbend HDO-36 Hotplate!
Southbend HDO-36 Hotplate is a heavy-duty countertop with stainless-steel front and sides,
aluminized steel rear and bottom panels and 4-inch stainless steel legs that are adjustable. It comes with a 12-inch cast flush top grates and a stainless steel, full-width, adjustable crumb tray. These features are fully removable, allowing a safer and easier cleaning and maintenance. Southbend HDO-36 Hotplate’s durable and clean finish proves that it is indeed the best match to the most productive kitchen there is.
Southbend HDO-36 Hotplate is equipped with 6 open-top, non-clogging burners. It is powered by a total of 198,000 BTU natural gas, promoting a safer kitchen operation. It has an 11-inch (H) 36-inch (W) 33.75 (D) dimension, and weighs of 253 pounds.
Being handy and safe at the same time, it comes with a 3/4-inch rear gas connection, pressure regulator and high/low burner controls. Southbend HDO-36 Hotplate is incomparable with other countertop of its kind as it built to be customized just way you want it to accomplish any cooking task.
Delivery Details
•tSouthbend HDO-36 Hotplate requires 2 or more persons to handle as it is reasonable large.
•tThis item requires a lift gate if a loading dock is not available.
•tPlease check the dimension of the access path to the final location (doors width and height). This is to ensure the item will fit.
•tSouthbend HDO-36 Hotplate is intended for commercial use only.
•tSouthbend HDO-36 Hotplate requires connection to a supply of electricity. The appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable. This product is intended for commercial use only, not for household use.
•tThis appliance should be connected ONLY to the type of gas for which it is equipped.
deliverynotes
●tSouthbend HDO-36 Hotplate requires 2 or more persons to handle as it is reasonable large. ●tThis item requires a lift gate if a loading dock is not available. ●tPlease check the dimension of the access path to the final location (doors width and height). This is to ensure the item will fit. ●tSouthbend HDO-36 Hotplate is intended for commercial use only. ●tSouthbend HDO-36 Hotplate requires connection to a supply of electricity. The appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable. This product is intended for commercial use only, not for household use. ●tThis appliance should be connected ONLY to the type of gas for which it is equipped.
Maintenance Guide
Although Southbend HDO-36 Hotplate is made to provide durable service, a daily maintenance and cleaning should be applied. To avoid “heat tint” caused by the thickening of the protective surface of the stainless steel. It can normally be removed by the foregoing, but tint which does not respond to this procedure calls for a vigorous scouring in the direction of the polish lines, using scotch-brite scouring pads or a stainless scouring pad in combination with a powered cleanser. To lessen the occurrence of heat tint, reduce or complete avoid heat to equipment during slack periods. For further maintenance guide, refer to the user manual provided by Southbend.